Dell PowerConnect 54 Series, User Manual

Page: 49 / 416

Starting and Configuring the Device
49
Configuring an Initial SSH Password
To configure an initial SSH password, enter the following commands:
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line ssh
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password jones.
• When initially logging onto a device through a SSH session, enter
jones
at the password prompt.
• When changing a device’s mode to enable, enter
jones
.
Configuring an Initial HTTP Password
To configure an initial HTTP password, enter the following commands:
console(config)#
ip http authentication
local
console(config)#
username
admin
password
user1
level
15
Configuring an Initial HTTPS Password
To configure an initial HTTPS password, enter the following commands:
console(config)#
ip https authentication
local
console(config)#
username
admin
password
user1
level
15
Enter the following commands once when configuring to use a terminal, a Telnet, or an SSH session in order
to use an HTTPS session.
NOTE:
In the Web browser enable SSL 2.0 or greater for the page content to be displayed.
console(config)# crypto certificate generate key_generate
console(config)# ip https server
When initially enabling an http or https session, enter
admin
for user name and
user1
for password.
NOTE:
Http and Https services require level 15 access and connect directly to the configuration level access.