Dell PowerConnect 54 Series, User Manual

Page: 184 / 416

184
Configuring System Information
Figure 6-80. User Security Model Table
Deleting an User Security Model Table Entry
1
Open the SNMPv3 User Security Model (USM) page.
2
Click Show All. The User Security Model Table opens.
3
Select a User Security Model Table entry.
4
Check the Remove checkbox.
5
Click Apply Changes . The User Security Model Table entry is deleted, and the device is updated.
Defining SNMP Users Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the User
Security Model page.
The following is an example of the CLI commands:
Table 6-38. SNMP User CLI Commands
CLI Command Description
snmp-server user username groupname [ remote
engineid-strin g][ auth-md5 password | auth-sha
password | auth-md5-key md5-des-key | auth-
sha-key sha-des-key ]
Configures a new SNMP V3 user.
show snmp users [ username ]
Displays the configuration of users.
console (config)# snmp-server user John user-group auth-md5 1234
console (config)# end
console (config)# show snmp users
Name Group Name Auth Method Remote
------- ---------- ----------- ------
John user-group md5