manualshive.com logo in svg

Dell PERCS140, User Manual

Share
Download
Dell PERCS140 User Manual Download Page 45

System does not boot

Check for the following causes when the system does not boot:

•

Incorrect 

Controller Mode 

at the 

System Setup.

•

Incorrect 

Boot Mode

, 

Boot Sequence

, and/or 

Boot Sequence Retry.

•

Bootable virtual disk is in 

Failed

 state.

•

Incorrect 

Boot Order

 for a bootable virtual disk.

•

A Non-RAID virtual disk is no longer in the first position in the BIOS Configuration Utility Ctrl+R list after the system is rebooted.

•

In a Linux RAID configuration, if virtual disks created exceeds the maximum limit of 16 and the boot virtual disk is not listed as one of the 
16 virtual disks in UEFI configuration utility.

•

In a Linux RAID configuration, if the virtual disk is created from the drives beyond the first 10 drives listed in the S140 UEFI HII.

Controller mode is set incorrectly at System Setup 

1 

In the system startup, when the 

Dell Power-On Self-Test (POST)

 screen is displayed, press F2 to enter the system BIOS screen.

2 

Scroll to 

SATA Settings

. Press Enter and ensure that the 

SATA Controller

 is set to RAID mode.

WARNING: 

While switching from RAID Mode to ATA Mode or AHCI Mode, there may be data loss.

Boot mode, boot sequence, and or boot sequence retry are set 
incorrectly 

1 

Turn on the system.

2 

When the Dell 

POST

 screen is displayed, press F2 to enter the system BIOS screen.

3 

Scroll to

 Boot Settings

. Press Enter and ensure that 

Boot Mode

 is set to 

BIOS

.

4 

Scroll to 

Boot Sequence

. Press Enter and ensure that 

Hard drive C:

 is the first device listed.

5 

Scroll to 

Boot Sequence Retry

. Ensure that the setting is 

Enabled

.

6 

Press Esc to exit and continue booting.

NOTE: 

If changes are made at the BIOS screen, a dialog box is displayed and asks you to save your changes and then 

exit.

Bootable virtual disk is in a failed state 

1 

Press Ctrl+Alt+Del to restart.

2 

After the system restart, press Ctrl+R. Check the status of the bootable virtual disk at the 

Virtual Disk 

field, or by highlighting 

View 

Virtual Disks Details

 and pressing Enter.

3 

Check for missing or offline physical disks.

Troubleshooting your system

45

Summary of Contents for PERCS140

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands