2. For M.2 2230 SSD:
a. Place the M.2 SSD into the SSD holder.
b. Replace the (M2x2) screw to secure the M.2 SSD to the holder.
c. Place the M.2 SSD module onto its slot on the computer.
d. Replace the (M2x3) screw to secure the M.2 SSD module to the computer.
3. Place the thermal plate above the M.2 SSD module.
4. Replace the (M2x3) screw to secure the SSD thermal plate to the M.2 SSD.
5. Repeat the above steps to install the other SSD modules in the computer.
Next steps
1. Install the
.
2. Install the
3. Follow the procedure in
after working inside your computer
.
Sekundært hukommelsesmodul
Removing the secondary memory module
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
.
3. Remove the
About this task
The figure indicates the location of the secondary memory module and provides a visual representation of the removal procedure.
Steps
1. Pry the securing clips from both side of the memory module until the memory module pops up.
2. Remove the memory module from the memory-module slot.
Adskillelse og samling
31
Summary of Contents for P93F
