Dell P89G, Owner'S Manual

Page: 28 / 99

2. Place the SSD bracket in its slot on the computer and replace the two (M2x3) screws to secure it to the system.
3. Install the: .
a. base cover
4. Follow the procedure in After working inside your computer .
Hard drive
Removing the hard disk drive
1. Follow the procedure in Before working inside your computer .
2. Remove the:
a. Removing the SIM tray – WWAN models on page 12
b. base cover
c. battery
3. To remove the hard disk drive (HDD):
a. Disconnect the HDD cable from the system board [1].
b. Peel the adhesive tape that secures the HDD cable to the system board [2]
c. Remove the 4 M2.0x5.5 screws that secure the HDD to the palmrest [1].
d. Lift the HDD from the computer [2].
28 Disassembly and reassembly