Table 27. System Configuration (continued)
Option
Description
●
SATA-0 (enabled by default)
●
SATA-1 (enabled by default)
●
SATA-2 (enabled by default)
●
M.2 PCIe SSD-0 (enabled by default)
Smart Reporting
This field controls whether hard drive errors for integrated drives are reported during system
startup. The
Enable Smart Reporting option
is disabled by default.
USB Configuration
Allows you to enable or disable the integrated USB controller for:
●
Enable USB Boot Support
●
Enable External USB Port
All the options are enabled by default.
Audio
Allows you to enable or disable the integrated audio controller. The option
Enable Audio
is
selected by default.
●
Enable Microphone
●
Enable Internal Speaker
Both the options are selected by default.
Miscellaneous Devices
Allows you to enable or disable the following devices:
●
Enable Camera (enabled by default)
Video
Option
Description
LCD Brightness
Allows you to set the display brightness depending up on the power source—On Battery and On AC. The
LCD brightness is independent for battery and AC adapter. It can be set using the slider.
NOTE:
The video setting is visible only when a video card is installed into the system.
Security
Table 28. Security
Option
Description
Admin Password
Allows you to set, change, or delete the admin password.
System Password
Allows you to set, change, or delete the system password.
Internal HDD-0 Password
Allows you to set, change or delete the internal HDD password.
Strong Password
This option lets you enable or disable strong passwords for the system.
Password Configuration
Allows you to control the minimum and maximum number of characters allowed for a
administrative password and the system password. The range of characters is between 4
and 32.
Password Bypass
This option lets you bypass the System (Boot) Password and the internal HDD password
prompts during a system restart.
●
Disabled — Always prompt for the system and internal HDD password when they are set.
This option is enabled by default.
●
Reboot Bypass — Bypass the password prompts on Restarts (warm boots).
NOTE:
The system will always prompt for the system and internal HDD passwords when
powered on from the off state (a cold boot). Also, the system will always prompt for
passwords on any module bay HDDs that may be present.
22
System setup
