manualshive.com logo in svg

Dell P2423, User Manual

Share
Download
Dell P2423 User Manual Download Page 55

Operating the monitor 

│

  55

LCD 

Conditioning

Helps reduce minor cases of image retention. 
Depending on the degree of image retention, the 
program may take some time to run. You can enable 
this feature by selecting 

On

.

Service Tag

Displays the service tag string of your monitor. This 
string is required when you look for phone support, 
check your warranty status, update drivers on Dell's 
website, etc. 

Self-

Diagnostic

Initiates the following self-diagnostic process:

1. When initiated, a gray screen appears.

2. Carefully inspect the screen for abnormalities.

3. Move the joystick. The color of the screen 

changes to red.

4. Inspect the display for any abnormalities.

5. Repeat steps 3 and 4 to inspect the display in 

green, blue, black, white and text screens.

The test is complete when the text screen appears. 
Press the joystick to end the testing process.

Reset Others

Resets all settings under the 

Others

 menu to the 

factory preset values.

Summary of Contents for P2423









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands