Dell P153G Service Manual Download Page 58 | Manualshive

Page: 58 / 66

background image

Updating the BIOS using the USB drive in Windows

Steps

1. Follow the procedure from step 1 to step 6 in

Updating the BIOS in Windows

to download the latest BIOS setup program file.

2. Create a bootable USB drive. For more information, see the knowledge base article

at

www.dell.com/support

.

3. Copy the BIOS setup program file to the bootable USB drive.
4. Connect the bootable USB drive to the computer that needs the BIOS update.
5. Restart the computer and press

F12

.

6. Select the USB drive from the

One Time Boot Menu

.

7. Type the BIOS setup program filename and press

Enter

.

The

BIOS Update Utility

appears.

8. Follow the on-screen instructions to complete the BIOS update.

Updating the BIOS in Linux and Ubuntu

To update the system BIOS on a computer that is installed with Linux or Ubuntu, see the knowledge base article

at

www.dell.com/support

Updating the BIOS from the F12 One-Time boot menu

Update your computer BIOS using the BIOS update.exe file that is copied to a FAT32 USB drive and booting from the F12
One-Time boot menu.

About this task

BIOS Update

You can run the BIOS update file from Windows using a bootable USB drive or you can also update the BIOS from the F12
One-Time boot menu on the computer.

Most of the Dell computers built after 2012 have this capability, and you can confirm by booting your computer to the F12
One-Time Boot Menu to see if BIOS FLASH UPDATE is listed as a boot option for your computer. If the option is listed, then the
BIOS supports this BIOS update option.

NOTE:

Only computers with BIOS Flash Update option in the F12 One-Time boot menu can use this function.

Updating from the One-Time boot menu

To update your BIOS from the F12 One-Time boot menu, you need the following:

●

USB drive formatted to the FAT32 file system (key does not have to be bootable)

●

BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB drive

●

AC power adapter that is connected to the computer

●

Functional computer battery to flash the BIOS

Perform the following steps to perform the BIOS update flash process from the F12 menu:

CAUTION:

Do not turn off the computer during the BIOS update process. The computer may not boot if you turn

off your computer.

Steps

1. From a turn off state, insert the USB drive where you copied the flash into a USB port of the computer.
2. Turn on the computer and press F12 to access the One-Time Boot Menu, select BIOS Update using the mouse or arrow keys

then press Enter.
The flash BIOS menu is displayed.

3. Click

Flash from file

.

4. Select external USB device.
5. Select the file and double-click the flash target file, and then click

Submit

.

6. Click

Update BIOS

. The computer restarts to flash the BIOS.

58

System setup

«
...
56
57
58
59
60
...
»

Summary of Contents for P153G



































































Reviews:

No comments

Related manuals for P153G

Brand: ZEOS Pages: 80

Brand: EUROCOM Pages: 92

Brand: Wanlida Pages: 33

Brand: HP Pages: 22

Armada 1500c Series

Brand: HP Pages: 36

6830s - Compaq Business Notebook

Brand: HP Pages: 36

Brand: HP Pages: 3

Brand: HP Pages: 12

8710p - Compaq Business Notebook

Brand: HP Pages: 42

Brand: HP Pages: 2

8530p - EliteBook - Core 2 Duo 2.4 GHz

Brand: HP Pages: 38

Brand: HP Pages: 3

Brand: HP Pages: 14

6830s - Compaq Business Notebook

Brand: HP Pages: 4

Brand: HP Pages: 65

Brand: HP Pages: 18

6820s - Notebook PC

Brand: HP Pages: 33

8510p - Compaq Business Notebook

Brand: HP Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands