Antennas
Removing the antenna modules
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
.
3. Remove the
(optional).
4. Remove the
.
5. Remove the
6. Remove the
.
7. Remove the
.
8. Remove the
9. Remove the
About this task
The following image provides a visual representation of the antenna modules removal procedure.
Steps
1. Remove the antenna cables from the routing guides on the display-assembly base.
2. Remove the two screws (M2x2.5) that secure the antenna modules to the middle frame.
3. Carefully peel the copper foil that secures the antenna cables to the middle frame.
4. Lift the antenna modules off the middle frame.
76
Removing and installing components
