Steps
1. Align and place the power-button board in the slot on the middle frame.
2. Replace the screw (M3x5) to secure the power-button board to the middle frame.
3. Slide the power-button board cable under the antenna cables, then route the power-button board cable to the display-assembly base.
4. Slide the power-button board cable into the connector on the system board and close the latch to secure the cable.
Next steps
1. Install the
.
2. Install the
.
3. Install the
4. Install the
5. Install the
6. Install the
7. Install the
8. Follow the procedure in
After working inside your computer
.
Microphones
Removing the microphones
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
.
3. Remove the
(optional).
4. Remove the
.
5. Remove the
6. Remove the
.
7. Remove the
8. Remove the
Removing and installing components
69
