Dell OptiPlex 7760 Service Manual Download Page 51 | Manualshive

Page: 51 / 137

background image

Smart-card reader

Removing the smart-card reader

Prerequisites

1. Follow the procedure in

before working inside your computer

.

2. Remove the

.

3. Remove the

.

4. Remove the

.

5. Remove the

.

6. Remove the

7. Remove the

primary M.2 SSD

8. Remove the

.

About this task

The figure indicates the location of the smart-card reader and provides a visual representation of the removal procedure.

Steps

1. Disconnect the touchpad buttons FPC from the touchpad.
2. Disconnect the smart-card reader FFC from the connector on the USH daughter board.
3. Peel the smart-card reader FFC from the touchpad.
4. Remove the two (M2x2.5) screws that secure the smart-card reader to the computer.
5. Remove the smart-card reader from the computer.

Installing the smart-card reader

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The figure indicates the location of the smart-card reader and provides a visual representation of the installation procedure.

Removing and installing components

51

«
...
49
50
51
52
53
...
»

Summary of Contents for OptiPlex 7760










































































































































Reviews:

No comments

Related manuals for OptiPlex 7760

Brand: Gateway Pages: 108

Brand: NEC Pages: 146

Afolux LX Series

Brand: IEI Technology Pages: 131

Pavilion Slimline s5500 - Desktop PC

Brand: Compaq Pages: 36

7012 300 Series

Brand: IBM Pages: 148

Brand: Vivo Pages: 3

Height Adjustable Standing Desk 4-Leg

Brand: Uplift Desk Pages: 7

Brand: Uplift Desk Pages: 2

Brand: HP Pages: 66

Brand: HP Pages: 28

9120A4U - ThinkCentre A61 - 9120

Brand: Lenovo Pages: 66

Brand: Lenovo Pages: 76

Brand: Lenovo Pages: 64

Brand: Lenovo Pages: 98

Brand: Lenovo Pages: 86

Brand: Lenovo Pages: 112

Brand: Lenovo Pages: 42

Precision 3640 Tower

Brand: Dell Pages: 112

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands