
●
Phillips screwdriver #0
●
Phillips screwdriver #1
●
Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Screw type
Quantity
Screw image
Base cover
Captive screws
8
Battery
M2x5
3
M.2 2280 PCIe 4 secondary
Solid-state drive (slot 6)
M2x3
2
M.2 2230 primary Solid-state
drive (slot 3, slot 4 and/or slot
5)
M2x3
M2x2
2
1
M.2 2280 primary Solid-state
drive (slot 3, slot 4 and slot 5)
M2x3
2
Keyboard
M2x2
6
WWAN
M2x3
1
WLAN
Captive screw
1
Memory shield
M2x3
1
Power-adapter cable bracket
M2x3
1
Power button board
M2x3
2
Power button assembly with
fingerprint reader cable bracket
M2.5x2.5
1
Inner frame
M2x3
10
Smart card reader
M2x2.5
2
Touchpad buttons
M2x2.5
2
SD card reader
M2.5x2.5
1
12
Removing and installing components
Summary of Contents for OptiPlex 7760
