Steps
1. Insert the hard-drive assembly into the slot on the computer until it clicks into place.
2. For 2.5-inch. hard-disk drive set as primary, connect the power cable and the blue hard-drive data cable to the connectors on the 2.5-
inch hard-disk drive.
Next steps
1. Install the
.
2. Follow the procedure in
after working inside your computer
.
3.5 in. hard-drive assembly
Removing the 3.5-inch hard-disk drive assembly
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
28
Disassembly and reassembly
Summary of Contents for OptiPlex 7080 Tower
