manualshive.com logo in svg

Dell OptiPlex 7080 Micro, Service Manual

Share
Download
Dell OptiPlex 7080 Micro Service Manual Download Page 29

Steps

1. Align the notch on the solid-state drive with the tab on the solid-state drive connector on the system board.
2. Insert the solid-state drive at a 45-degree angle into the solid-state drive connector.
3. Replace the screw (M2x3.5) that secures the M.2 2280 PCIe solid-state drive to the system board.

Next steps

1. Install the 

hard-drive assembly

.

2. Install the 

front bezel

.

3. Install the 

side cover

.

4. Follow the procedure in 

after working inside your computer

.

WLAN card

Removing the WLAN card

Prerequisites

1. Follow the procedure in 

before working inside your computer

.

2. Remove the 

side cover

.

3. Remove the 

front bezel

.

4. Remove the 

hard-drive assembly

.

About this task

The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.

Disassembly and reassembly

29

Summary of Contents for OptiPlex 7080 Micro


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands