![Dell OptiPlex 5480 All-in-One Service Manual Download Page 16](http://html.mh-extra.com/html/dell/optiplex-5480-all-in-one/optiplex-5480-all-in-one_service-manual_80863016.webp)
2. Hold the button in the release position, and lift the stand upward.
3. Slide the stand downward, to lift the stand off the back cover.
4. Pry the rubber feet from the bottom cover and pull it out.
Installing the articulating stand
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the articulating stand and provides a visual representation of the installation procedure.
16
Removing and installing components