Option
Description
Wake on LAN/
WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
•
Disabled
: This option is enabled by default.
•
LAN Only
•
WLAN Only
•
LAN or WLAN
•
LAN with PXE Boot
Block Sleep
This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
POST Behavior screen options
Option
Description
Numlock LED
This option option specifies whether the NumLock LED should be on when the system boots.
•
Enable Numlock LED: The option is enabled.
Keyboard Errors
This option option specifies whether the keyboard related errors are reported when it boots.
•
Enables Keyboard Error Detection: The option is enabled by default.
Fastboot
Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
Minimal
•
Thorough
(default)
•
Auto
Extend BIOS POST
Time
This option created an additional pre-boot delay.
•
0 seconds (default)
•
5 seconds
•
10 seconds
Full Screen Logo
. This option displays full screen logo if your image match screen resolution. The option Enable Full Screen Logo is
not selected by default.
Warnings and Errors
•
Prompt on Warnings and Errors
(default)
•
Continue on Warnings
•
Continue on Warnings and Errors
Manageability
Option
Description
USB Provision
When enabled Intel AMT can be provisioned using the local provisioning file via a USB storage device.
System setup
37
Summary of Contents for OptiPlex 5270 All-in-One
