3
Install the following components:
a
b
c
d
4
Follow the procedure in
After working inside your computer
.
Pop-Up Camera
Removing the pop-up camera
1
Follow the procedure in
Before working inside your computer
.
2
Remove the following components:
a
b
c
3
To remove the camera assembly cover:
a Remove the two screws (M3x5) that secure the camera assembly cover to the middle frame [1].
b Lift the camera assembly cover away from the middle frame [2].
c Disconnect the camera cable from the system board [3].
Removing and Installing components
47
Summary of Contents for OptiPlex 5260
Page 1: ...Dell OptiPlex 5260 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Page 57: ...4 Pry and lift the base cover off the middle frame Removing and Installing components 57 ...
Page 61: ...b Slide the PSU and lift it away from the chassis Removing and Installing components 61 ...
