4
Install the following components:
a
b
c
5
Follow the procedure in
After working inside your computer
.
WLAN card
Removing the WLAN card
1
Follow the procedure in
Before working inside your computer
.
2
Remove the following components:
a
b
c
3
To remove the WLAN card shield:
a Remove the two screws (M2x2.5) that secure the WLAN card shield to the system board [1].
b Remove the WLAN card shield from the system board [2].
Removing and Installing components
37
Summary of Contents for OptiPlex 5260
Page 1: ...Dell OptiPlex 5260 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Page 57: ...4 Pry and lift the base cover off the middle frame Removing and Installing components 57 ...
Page 61: ...b Slide the PSU and lift it away from the chassis Removing and Installing components 61 ...
