Installing the SSD card
1
Replace the thermal pad on the rectangular outline marked on the system board [1].
NOTE:
M.2 PCIe SSD with capacity over 512G (512G/1TB/2TB) must be installed with a thermal pad. M.2 SATA SSD and
M.2 PCIe SSD with 128G and 256G do not require a thermal pad.
2
Insert the SSD card into the card slot on the system board [2].
3
Replace the screw (M2x2.5) that secures the SSD card to the system board [3].
34
Removing and Installing components
Summary of Contents for OptiPlex 5260
Page 1: ...Dell OptiPlex 5260 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Page 57: ...4 Pry and lift the base cover off the middle frame Removing and Installing components 57 ...
Page 61: ...b Slide the PSU and lift it away from the chassis Removing and Installing components 61 ...
