Option
Description
•
Diskette Drive
•
Internal HDD
•
USB Storage Device
•
CD/DVD/CD-RW Drive
•
Onboard NIC
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the
Enable Legacy Option ROMs
is disabled.
UEFI Booth Path
Security
This options controls whether or not the system will prompt the user to enter the Admin password when booting a
UEFI boot path from the F12 Boot Menu.
•
Always, Except Internal HDD
•
Always
•
Never: This option is enabled by default.
Date/Time
Allows you to change the date and time.
System configuration screen options
Option
Description
Integrated NIC
If you enable UEFI network stack, UEFI network protocols will be available. UEFI network allows pre-os and early os
networking features to use NICs that are enabled. This may be used without PXE turned on. When you enable
Enabled w/PXE, the type of PXE boot (Legacy PXE or UEFI PXE) depends on the current boot mode and type of
option ROMs in use. The UEFI Network Stack is required in order to have UEFI PXE functionality fully enabled.
•
Enabled UEFI Network Stack - This option is disabled by default.
Allows you to configure the integrated network controller. The options are:
•
Disabled
•
Enabled
•
Enabled w/PXE: This option is enabled by default.
NOTE:
Depending on the computer and its installed devices, the items listed in this section may or may
not appear.
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
•
Disabled
•
AHCI: This option is enabled by default.
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
SATA-0
•
SATA-1
•
SATA-2
•
SATA-3
•
SATA-4
56
Настройка системы
