Dell OptiPlex 5055 Tower Owner'S Manual Download Page 69

Page: 69 / 80

Table 17. Chipset Specifications

Feature

Specification

Chipset

AMD B350 Chipset

Processor

Table 18. Processor Specifications

Feature

Specification

Processor type

•

AMD Ryzen 7 PRO 1700 (OC/L2 Cache: 4 MB/16T/3.0 GHz/65 W)

•

AMD Ryzen 5 PRO 1500 (QC/L2 Cache: 2 MB/8T/3.5 GHz/65 W)

•

AMD Ryzen 3 PRO 1300 (QC/L2 Cache: 2 MB/4T/3.5 GHz/65 W)

•

AMD R7 PRO A12-9800 (QC/L2 Cache: 2 MB/3.8 GHz/65 W);

•

AMD R7 PRO A10-9700 (QC/ L2 Cache: 2 MB/3.5 GHz/65 W)

•

AMD R7 PRO A8-9600 (QC/ L2 Cache: 2 MB/3.1 GHz/65 W)

•

AMD R7 PRO A6-9500 (DC/ L2 Cache: 1 MB/3.5 GHz/65 W)

Total L2 cache

Up to 4MB

NOTE:

Extended Frequency (XFR) in GHz are not supported on OptiPlex 5055.

Memory

Table 19. Memory Specifications

Feature

Specification

Memory type

DDR4

Memory speed

Up to 2400 MHz

Memory connectors

Four DIMM slots

Memory capacity

Up to 64 GB

Minimum memory

4 GB (2 GB for Linux based OS only)

Maximum memory

64 GB

Video

Table 20. Video Specifications

Feature

Specification

Integrated

AMD Radeon R7 Graphics [with PRO A12-9800 , A10-9700, A8-9600,
A6-9500]Not available

Optional

•

1 GB AMD Radeon R5 430

•

2 GB AMD Radeon R5 430

System setup

Summary of Contents for OptiPlex 5055 Tower

















































































Search results

Summary of Contents for OptiPlex 5055 Tower

Reviews:

Related manuals for OptiPlex 5055 Tower

Brands by name

Popular brands

Dell OptiPlex 5055 Tower, Owner'S Manual

Search results

Summary of Contents for OptiPlex 5055 Tower

Reviews:

Related manuals for OptiPlex 5055 Tower

Brands by name

Popular brands