Installing the processor
1
Align the processor with the socket keys.
CAUTION:
Do not use force to seat the processor. When the processor is positioned correctly, it engages easily into the
socket.
2
Align the pin-1 indicator of the processor with the triangle on the socket.
3
Place the processor on the socket such that the slots on the processor align with the socket keys.
4
Close the processor shield by sliding it under the retention screw.
5
Lower the socket lever and push it under the tab to lock it.
6
Install the
7
Close the front panel door.
8
Install the:
a
b
9
Follow the procedure in
After working inside your computer
.
38
Disassembly and reassembly
Summary of Contents for OptiPlex 5055 Tower
Page 1: ...Dell OptiPlex 5055 Tower Owner s Manual Regulatory Model D18M Regulatory Type D18M004 ...
Page 12: ...4 Lift the front bezel to remove it from the computer 12 Disassembly and reassembly ...
Page 44: ...b Slide and lift the system board away from the computer 2 44 Disassembly and reassembly ...
