Figure 80. Installing a power supply unit blank
Next steps
Follow the procedure listed in
After working inside your system
.
Removing a power supply unit
Prerequisites
CAUTION:
The system needs one power supply unit (PSU) for normal operation. On power-redundant systems,
remove and replace only one PSU at a time in a system that is powered on.
1. Follow the safety guidelines listed in
.
2. Disconnect the power cable from the power source and from the PSU you intend to remove, and then remove the cable
from the strap on the PSU handle.
Steps
Press the orange release latch and slide the PSU out of the system by using the PSU handle.
Figure 81. Removing a power supply unit
Next steps
.
92
Installing and removing system components
