6. Restart your system.
7. Enter
System Setup
again.
8. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
9. From the
Intel TXT
option, select
On
.
Converting the system from tower mode to rack mode
Your system can be converted from the tower mode to the rack mode.
To convert your system from the tower mode to the rack mode, you require the tower to rack conversion kit, which contains
the following:
●
Rack ears (left and right) with three screws each
Converting the system from tower mode to rack mode
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
3. If installed, remove the system feet or caster wheels.
Steps
1. Remove the control-panel assembly.
2. Install the rack slide cover by performing the following steps:
a. Slide the rack slide cover between the system's side cover and the chassis.
b. Slide the rack slide cover toward the back of the system until the tabs on rack slide cover locks with the tabs extending
from the chassis.
3. Install the control panel assembly.
4. Install the rack ears by performing the following steps:
a. Align the three screw holes on the rack ears with the screw holes on the top and the bottom of system.
b. Using a Phillips #2 screwdriver, secure the rack ears to the system.
Figure 96. Installing the system ears
106
Installing and removing system components
