Dell Networking S6000 System, Reference Manual, Page: 993 / 1510

Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
ip ospf priority
To determine the designated router for the OSPF network, set the priority of the interface.
S6000
Syntax
ip ospf priority number
To return to the default setting, use the
no ip ospf priority
command.
Parameters
number Enter a number as the priority. The range is from 0 to 255.
The default is
1 .
Defaults 1
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information
Setting a priority of 0 makes the router ineligible for election as a designated router
or backup designated router.
Open Shortest Path First (OSPFv2 and OSPFv3)
993