Dell Networking S6000 System, Reference Manual, Page: 978 / 1510

inter-area dist2 (OPTIONAL) Enter the keywords
inter-area
then a number
to specify a distance metric for routes between areas. The
range is from 1 to 255. The default is
110 .
intra-area dist1 (OPTIONAL) Enter the keywords
intra-area
then a number
to specify a distance metric for all routes within an area. The
range is from 1 to 255. The default is
110 .
Defaults
• external dist3 = 110
• inter-area dist2 = 110
• intra-area dist1 = 110
Command
Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information To specify a distance for routes learned from other routing domains, use the
redistribute
command.
distribute-list in
Apply a filter to incoming routing updates from OSPF to the routing table.
S6000
Syntax
distribute-list prefix-list-name in [ interface ]
To delete a filter, use the
no distribute-list prefix-list-name in
[ interface ]
command.
978
Open Shortest Path First (OSPFv2 and OSPFv3)