Dell Networking S6000 System, Reference Manual, Page: 977 / 1510

Parameters
weight Specify an administrative distance. The range is from 1 to
255. The default is
110 .
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If
you enter a router ID, include the mask for that router
address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n
format.
access-list-
name (OPTIONAL) Enter the name of an IP standard access list, up
to 140 characters.
Defaults 110
Command
Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
distance ospf
Configure an OSPF distance metric for different types of routes.
S6000
Syntax
distance ospf [external dist3 ] [inter-area dist2 ] [intra-area
dist1 ]
To delete these settings, use the
no distance ospf
command.
Parameters
external dist3 (OPTIONAL) Enter the keyword
external
then a number to
specify a distance for external type 5 and 7 routes. The range
is from 1 to 255. The default is
110 .
Open Shortest Path First (OSPFv2 and OSPFv3)
977