Dell Networking S6000 System, Reference Manual, Page: 971 / 1510

Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Related
Commands show ip ospf statistics — displays the OSPF statistics.
debug ip ospf
Display debug information on OSPF. Entering the
debug ip ospf
commands enables OSPF debugging
for the first OSPF process.
S6000
Syntax
debug ip ospf [ process-id] [vrf vrf-name] [bfd |event | packet
| spf | database-timer rate-limit]
To cancel the debug command, use the
no debug ip ospf
command.
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
vrf vrf-name Enter the keyword
vrf
to view debugging information on
OSPF corresponding to that VRF.
bfd (OPTIONAL) Enter the keyword
bfd
to debug only OSPF BFD
information.
event (OPTIONAL) Enter the keyword
event
to debug only OSPF
event information.
packet (OPTIONAL) Enter the keyword
packet
to debug only OSPF
packet information.
spf (OPTIONAL) Enter the keyword
spf
to display the Shortest
Path First information.
database-timer
rate-limit (OPTIONAL) Enter the keywords
database-timer rate-
limit
to display the LSA throttling timer information. This
applies to the S4810 platform only.
Open Shortest Path First (OSPFv2 and OSPFv3)
971