
Version 7.5.1.0
Introduced on the C-Series.
Usage
Information
By default, Dell Networking OS distributes incoming traffic based on a hash
algorithm using the following criteria:
• IP source address
• IP destination address
• TCP/UDP source port
• TCP/UDP destination port
load-balance hg
Choose the traffic flow parameters the hash calculation uses while distributing the traffic across internal
higig links.
S6000
Syntax
[no] load-balance hg { ip-selection | ipv6-selection [
source-ip
|
source-ipv6
|
source-port-id
|
source-module-id
|
dest-ip
|
dest-ipv6
|
dest-port-id
|
dest-module-id
|
protocol
|
vlan
|
L4-source-port
|
L4-dest-port
] | mac [
source-mac
|
source-
port-id
|
source-module-id
|
dest-mac
|
dest-port-id
|
dest-
module-id
|
vlan
|
ethertype
|
source-dest-mac
] | tunnel
[
ipv4-over-ipv4
|
ipv4-over-gre-ipv4
|
mac-in-mac
]}
Parameters
{ip-selection|
ipv6-selection
[
source-ip
|
source-ipv6
|
source-port-id
|
source-
module-id
|
dest-ip
|
dest-
ipv6
|
dest-
port-id
|
dest-
module-id
|
protocol
|
vlan
|
L4-source-port
|
L4-dest-port
]
To use IPv4 key fields in hash computation, enter the
keyword
ip-selection
then one of the parameters. To use
IPv6 key fields in hash computation, enter the keyword
ipv6-selection
then one of the parameters.
• source-ip — Use IPv4 src-ip field in hash calculation.
• source-ipv6 — Use IPv6 src-ip field in hash calculation
• source-port-id — Use src-port-id field in hash
calculation.
• source-module-id — Use src-module-id field in hash
calculation.
• dest-ip — Use IPv4 dest-ip field in hash calculation.
• dest-ipv6 — Use IPv6 dest-ip field in hash calculation
• dest-port-id — Use dest-port-id field in hash calculation.
• dest-module-id — Use dest-module-id field in hash
calculation.
• protocol — Use IPv4 protocol field in hash calculation.
• vlan — Use vlan field in hash calculation.
• L4-source-port — Use IPv4 L4-source-port field in hash
calculation.
• L4-dest-port — Use IPv4 L4-dest-port field in hash
calculation.
IPv4 Routing
741
Summary of Contents for Networking S6000 System
