Dell Networking S6000 System Reference Manual Download Page 66

Page: 66 / 1510

Field

Description
• w = write access

Prefixes

Displays the name of the storage location.

Related
Commands

format flash (S-Series)

– Erases all the existing files and reformats the filesystem in

the internal flash memory on the S-Series.

show os-version

Display the release and software image version information of the image file specified.

S6000

Syntax

show os-version [

file-url

]

Parameters

file-url

(OPTIONAL) Enter the following location keywords and
information:

• For a file on the internal flash, enter

flash://

followed

by the filename.

• For a file on an FTP server, enter

ftp://

user:password@hostip/filepath.

• For a file on a TFTP server, enter

tftp://hostip/

filepath

• For a file on the USB port, enter

usbflash://

filepath

Defaults

none

Command
Modes

EXEC Privilege

Command
History

This guide is platform-specific. For command information about other platforms,
refer to the relevant

Dell Networking OS Command Line Reference Guide

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 7.6.1.0

Introduced on the S-Series.

File Management

Summary of Contents for Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Networking S6000 System

Reviews:

Dell Networking S6000 System, Reference Manual, Page: 66 / 1510

Search results

Summary of Contents for Networking S6000 System

Reviews: