show boot system
Displays information about boot images currently configured on the system.
S6000
Syntax
show boot system {stack-unit
{0-11 | 0-7 | 0-5 | all}
}
Parameters
all
Enter the keyword
all
to display the boot image information
for all line cards and rpms.
stack-unit
Enter the keyword
stack-unit
followed by a number to
display boot image information for a stack-unit.
The S6000 range is from 0 to 5.
Defaults
none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000
Version 8.3.7.0
Introduced on the S4810.
Version 7.7.1.0
Introduced on the C-Series and E-Series.
Example
Dell#show boot system stack-unit 0
Current system image information in the system:
=============================================
Type Boot Type A B
---------------------------------------------------------------
-
Stack-unit 0 FLASH BOOT 9-0(2-1) 9-0(2-0)
[boot]
Dell#
File Management
63
Summary of Contents for Networking S6000 System
