Dell Networking S6000 System, Reference Manual

Page: 597 / 1510

Defaults normal
Command
Modes CONFIGURATION-INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage
Information
Fixed registration prevents an interface, configured using the command line, to
belong to a VLAN (static configuration) from being unconfigured when it receives a
Leave
message. Therefore, Registration mode on that interface is fixed.
Normal registration is the default registration. The port’s membership in the VLAN
depends on GVRP. The interface becomes a member of a VLAN after learning
about the VLAN through GVRP. If the VLAN is removed from the port that sends
GVRP advertisements to this device, the port stops being a member of the VLAN.
To advertise or learn about VLANs through GVRP, use the
forbidden
command
when you do not want the interface.
Related
Commands show gvrp — displays the GVRP configuration including the registration.
protocol gvrp
Access GVRP protocol — (config-gvrp)#.
S6000
Syntax
protocol gvrp
Defaults Disabled.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
GARP VLAN Registration (GVRP)
597