Dell Networking S6000 System, Reference Manual

Page: 415 / 1510

*>n 66.66.66.77/32 0.0.0.0 0 32768 i
*>n 66.66.77.77/32 0.0.0.0 0 32768 i
show ip bgp neighbors
Allows you to view the information BGP neighbors exchange.
S6000
Syntax
show ip bgp [vrf vrf-name ] [ ipv4 unicast ] neighbors [ ip-address
[advertised-routes | dampened-routes | detail | flap-statistics
| routes | {received-routes [
network [ network-mask ]]} |
{denied-routes [ network [ network-mask ]]}]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword
vrf
and then the name of
the VRF to view information exchanged by BGP neighbors
corresponding to that VRF.
NOTE: You can use this attribute to view information
exchanged by BGP neighbors that correspond to either a
default or a non-default VRF.
ipv4 unicast (OPTIONAL) Enter the keywords
ipv4 unicast
to view
information only related to ipv4 unicast routes.
ip-address (OPTIONAL) Enter the IP address of the neighbor to view
only BGP information exchanged with that neighbor.
advertised-
routes (OPTIONAL) Enter the keywords
advertised-routes
to
view only the routes the neighbor sent.
dampened-
routes (OPTIONAL) Enter the keywords
dampened-routes
to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword
detail
to view neighbor-
specific internal information for the IPv4 Unicast address
family.
flap-statistics (OPTIONAL) Enter the keywords
flap-statistics
to view
flap statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword
routes
to view only the
neighbor’s feasible routes.
received-
routes
[
network
[ network-mask ]
(OPTIONAL) Enter the keywords
received-routes
then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
received from neighbors.
NOTE: Configure the
neighbor soft-
reconfiguration inbound
command prior to
viewing all the information received from the neighbors.
Border Gateway Protocol
415