neighbor description
Assign a character string describing the neighbor or group of neighbors (peer group).
S6000
Syntax
neighbor {
ip-address
|
peer-group-name
} description
text
To delete a description, use the
no neighbor {
ip-address
|
peer-group-
name
} description
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group.
text
Enter a continuous text string up to 80 characters.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.8.1.0
Introduced on the S-Series.
Version 7.7.1.0
Introduced on the C-Series.
neighbor distribute-list
Distribute BGP information via an established prefix list.
S6000
Syntax
neighbor {
ip-address
|
peer-group-name
} distribute-list
prefix-
list-name
{in | out}
To delete a neighbor distribution list, use the
no neighbor {
ip-address
|
peer-group-name
} distribute-list
prefix-list-name
{in | out}
command.
Border Gateway Protocol
367
Summary of Contents for Networking S6000 System
