peer-group-
name
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
number
Enter a number of times to allow this neighbor ID to use the
AS path. The range is from 1 to 10.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.8.1.0
Introduced on the S-Series.
Version 7.7.1.0
Introduced on the C-Series.
Usage
Information
You cannot set this configuration for a peer that is associated with a peer group.
Similarly, you cannot associate a peer to a peer group if that peer is already
configured with these settings.
Related
Commands
— enables 4-byte support for the BGP process.
neighbor default-originate
Inject the default route to a BGP peer or neighbor.
S6000
Syntax
neighbor {
ip-address
|
peer-group-name
} default-originate
[route-map
map-name
]
To remove a default route, use the
no neighbor {
ip-address
|
peer-
group-name
} default-originate
command.
Parameters
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group-
name
Enter the name of the peer group to set the default route of
all routers in that peer group.
Border Gateway Protocol
365
Summary of Contents for Networking S6000 System
