Dell Networking S6000 System, Reference Manual, Page: 1249 / 1510

Version 7.7.1.0 Added support for the
secret
option and the MD5
password encryption. Extended the name from 25 to 63
characters.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information To view the defined user names, use the
show running-config user
command.
Related
Commands
password — specifies a password for users on terminal lines.
show running-config — views the current configuration.
RADIUS Commands
The following RADIUS commands are supported by Dell Networking OS.
debug radius
View RADIUS transactions to assist with troubleshooting.
S6000
Syntax
debug radius
To disable debugging of RADIUS, use the
no debug radius
command.
Defaults Disabled.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Security
1249