Dell Networking S6000 System, Reference Manual

Page: 1244 / 1510

Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information
CAUTION: Encrypting passwords with this command does not provide a
high level of security. When the passwords are encrypted, you cannot return
them to plain text unless you re-configure them. To remove an encrypted
password, use the
no password password
command.
To keep unauthorized people from viewing passwords in the switch configuration
file, use the
service password-encryption
command. This command
encrypts the clear-text passwords created for user name passwords, authentication
key passwords, the privileged command password, and console and virtual
terminal line access passwords.
To view passwords, use the
show running-config
command.
show privilege
View your access level.
S6000
Syntax
show privilege
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
1244
Security