Dell Networking S6000 System, Reference Manual, Page: 1240 / 1510

Related
Commands
show running-config — views the current configuration.
privilege level (CONFIGURATION mode) — controls access to the command
modes within the switch.
login authentication
To designate the terminal lines, apply an authentication method list.
S6000
Syntax
login authentication { method-list-name | default}
To use the local user/password database for login authentication, use the
no
login authentication
command.
Parameters
method-list-
name Enter the keywords
method-list-name
to specify that
method list, created in the
aaa authentication login
command, to be applied to the designated terminal line.
default Enter the keyword
default
to specify that the default
method list, created in the
aaa authentication login
command, is applied to the terminal line.
Defaults No authentication is performed on the console lines. Local authentication is
performed on the virtual terminal and auxiliary lines.
Command
Modes LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0 Introduced on the E-Series.
Usage
Information If you configure the
aaa authentication login default
command, the
login authentication default
command automatically is applied to all
terminal lines.
1240
Security