Dell Networking S6000 System, Reference Manual

Page: 1211 / 1510

Related
Commands
forward-delay — changes the wait time before RSTP transitions to the Forwarding
state.
max-age — changes the wait time before RSTP refreshes the protocol
configuration information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
RSTP bridge.
S6000
Syntax
max-age seconds
To return to the default values, use the
no max-age
command.
Parameters
max-age Enter a number of seconds the Dell Networking OS waits
before refreshing configuration information. The range is
from 6 to 40 seconds. The default is
20 seconds .
Defaults 20 seconds
Command
Modes CONFIGURATION RSTP (conf-rstp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.2.1.1 Introduced on the E-Series.
Related
Commands
forward-delay — changes the wait time before RSTP transitions to the Forwarding
state.
Rapid Spanning Tree Protocol (RSTP)
1211