Dell Networking S6000 System, Reference Manual

Page: 119 / 1510

0 0 down UNKNOWN down 0
0 1 up AC up 6504
Dell#show environment thermal-sensor
-- Thermal Sensor Readings (deg C) --
Unit Sensor0 Sensor1 Sensor2 Sensor3 Sensor4 Sensor5
Sensor6
---------------------------------------------------------------
--------------------
0 39 36 37 37 31
31 46
show inventory
Display the S-Series or Z-Series switch type, components (including media), and Dell Networking
Operating System (OS), including hardware identification numbers and configured protocols.
S6000
Syntax
show inventory [media slot ]
Parameters
media slot (OPTIONAL) Enter the keyword
media
then the stack ID of
the stack member for which you want to display pluggable
media inventory.
NOTE: This parameter is available but not supported in
Dell Networking Operating System version 8.3.11.4.
Because stacking is not supported, if you use this
parameter, the output displays “Media not present or
accessible” (refer to the
Usage Information section).
Defaults none
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0 Introduced on the S4820T.
Control and Monitoring
119