Dell Networking S6000 System, Reference Manual, Page: 1053 / 1510

•
range
= inclusive range of ports (you must specify two
ports for the port command parameter.)
source port Enter the keywords
source-port
then the port number to
be matched in the ACL rule in the ICAP rule
destination-
port Enter the keywords
destination-port
then the port
number to be matched in the ACL rule in the ICAP rule.
source-port-
range Enter the keywords
Source-port-range
then the range of
the start port to end port to be matched in the ACL rule in
the ICAP rule.
destination-
port-range Enter the keywords
destination-port-range
then the
range of the start port to end port to be matched in the ACL
rule in the ICAP rule.
Defaults none
Command
Modes REDIRECT-LIST
Command
History
Version 9.4.0.0 Introduced on the S6000.
show cam pbr
Display the PBR CAM content.
S6000
Syntax
show cam pbr {[interface interface ] | stack—unit slot-number
port-set number ]} [summary]
Parameters
interface
interface
Enter the keyword
interface
then the name of the
interface.
stack–unit
number
Enter the keyword
stack-unit
then the slot number. The
range is from 0 to 11 .
port-set
number
Enter the keywords
port-set
then the port-pipe number.
The range is from 0 to 1.
summary Enter the keyword
summary
to view only the total number of
CAM entries.
Defaults none
Command
Modes EXEC
Policy-based Routing (PBR)
1053