Dell Networking S6000 System, Reference Manual, Page: 1042 / 1510

1.1.1.1 E/-/-/ 1 10.0.0.1 Gi 7/1 1
Dell#
summary-address
To advertise one external route, set the OSPF ASBR.
S6000
Syntax
summary-address ip-address mask [not-advertise] [tag tag-value ]
To disable summary address, use the
no summary-address ip-address mask
command.
Parameters
ip-address Specify the IP address in dotted decimal format of the
address to summarize.
mask Specify the mask in dotted decimal format of the address to
summarize.
not-advertise (OPTIONAL) Enter the keywords
not-advertise
to
suppress that match the network prefix/mask pair.
tag tag-value (OPTIONAL) Enter the keyword
tag
then a value to match
on routes redistributed through a route map. The range is
from 0 to 4294967295.
Defaults Not configured.
Command
Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
1042
Open Shortest Path First (OSPFv2 and OSPFv3)