Dell Networking S6000 System, Reference Manual, Page: 1003 / 1510

• 2 = for OSPF External type 2
route-map
map-name
(OPTIONAL) Enter the keywords
route-map
then the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword
tag
to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Defaults none
Command
Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.3 Added Route Map for BGP Redistribution to OSPF.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added the keyword
default
.
pre-Version
6.1.1.1 Introduced on the E-Series.
redistribute isis
Redistribute IS-IS routing information throughout the OSPF instance.
S6000
Syntax
redistribute isis [ tag ] [level-1 | level-1-2 | level-2] [metric
metric-value | metric-type type-value ] [route-map map-name ]
[tag tag-value ]
To disable redistribution, use the
no redistribute isis [ tag ] [level-1 |
level-1-2 | level-2] [metric metric-value | metric-type type-
value ] [route-map map-name ] [tag tag-value ]
command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
Open Shortest Path First (OSPFv2 and OSPFv3)
1003