Dell N1100-ON, Reference Manual

Page: 930 / 2332

Security Commands
930
User Guidelines
This command has no user guidelines.
Example
The following example configures the number of times the RADIUS client
attempts to retransmit requests to the RADIUS server to five attempts.
console(config)#radius-server retransmit 5
radius-server source-ip
Use the radius-server source-ip command to specify the source IPv4 address
used in the IP header for communication with RADIUS servers. To return to
the default, use the no form of this command. 0.0.0.0 is interpreted as a
request to use the IPv4 address of the outgoing IP interface.
Syntax
radius-server source-ip source
no radius-server source-ip
• source — Specifies the source IPv4 address.
Default Configuration
The default IPv4 address is the outgoing interface IPv4 address.
Command Mode
Global Configuration mode
User Guidelines
The command configures the source IP address present in the IPv4 header. It
is not the optional NAS-IP-Address in the RADIUS message. Use the radius-
server attribute 4 command to configure the NAS-IP-Address attribute sent in
the RADIUS Access-Request message.
Example
The following example configures the source IP address used for
communication with RADIUS servers to 10.1.1.1.