Dell N1100-ON, Reference Manual

Page: 444 / 2332

Layer 2 Switching Commands
444
This command is available in Ethernet interface configuration mode for
copper ports that are EEE capable. Configuring the values on interfaces that
do not support EEE will return an error.
Command History
Syntax added in 6.4 release.
clear green-mode statistics
Use the clear green-mode statistics command to clear:
• The EEE LPI event count, and LPI duration
• The EEE LPI history table entries
• The Cumulative Power savings estimates
for a specified interface or for all the interfaces based upon the argument.
Syntax
clear green-mode statistics {interface-id | all }
• interface-id—An Ethernet interface identifier.
See Interface Naming
Conventions for interface representation.
• all —All Ethernet interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec
User Guidelines
This command has no user guidelines.
green-mode eee-lpi-history
Use the green-mode eee-lpi-history command in Global Configuration mode
to configure the Global EEE LPI history collection interval and buffer size.
This value is applied globally on all interfaces on the stack. LPI history is only