Dell N1100-ON, Reference Manual

Page: 330 / 2332

Layer 2 Switching Commands
330
Example
console(config)#dhcp l2relay vlan 10,340-345
show dhcp l2relay all
Use the show dhcp l2relay all command to display the summary of DHCP L2
Relay configuration.
Syntax
show dhcp l2relay all
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console #show dhcp l2relay all
DHCP L2 Relay is Enabled.
Interface L2RelayMode TrustMode
---------- ----------- --------------
Gi1/0/2 Enabled untrusted
Gi1/0/4 Disabled trusted
VLAN Id L2 Relay CircuitId RemoteId
--------- ---------- ----------- ------------
3 Disabled Enabled --NULL--
5 Enabled Enabled --NULL--
6 Enabled Enabled --dell--
7 Enabled Disabled --NULL--
8 Enabled Disabled --NULL--
9 Enabled Disabled --NULL--
10 Enabled Disabled --NULL--