Dell N1100-ON, Reference Manual

Page: 2101 / 2332

Switch Management Commands
2101
User Guidelines
The group-name parameter can be used to restrict the access rights of a
community string. When it is specified, the software:
• Generates an internal security-name.
• Maps the internal security-name for SNMPv1 and SNMPv2 security
models to the group-name.
Example
The following example maps a community access string dell_community to
group dell_group.
console(config)# snmp-server community-group dell_community dell_group
ipaddress 192.168.29.1
snmp-server contact
Use the snmp-server contact command in Global Configuration mode to set
up a system contact (sysContact) string. To remove the system contact
information, use the no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
• text — Character string, 1 to 255 characters, describing the system
contact information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.