Dell N1100-ON, Reference Manual

Page: 2065 / 2332

Switch Management Commands
2065
Bytes Used: 51904512
Bytes Free: 950255616
exception switch-chip-register
Use the exception switch-chip-register command to enable dumping the
switch chip registers in case of an exception. The register dump is taken only
for the master unit and not for the stack member units. Use the no form of
the command to disable dumping of the switch-chip registers.
Syntax
exception switch-chip-register
no exception switch-chip-register
Default Configuration
By default, switch register dumps are disabled.
Command Modes
Global Configuration mode
User Guidelines
This option should only be used under the direction of Dell support
personnel.
Switch registers are captured to the local file system.
ip http timeout-policy
Use the ip http timeout-policy command to configure the timeout policy for
closing HTTP and HTTPS sessions to the local HTTP server.
Syntax
ip http timeout-policy idle seconds life seconds
no ip http timeout-policy