Dell N1100-ON, Reference Manual

Page: 2055 / 2332

Switch Management Commands
2055
Example
The following example displays.
console#debug ping packet
debug rip
Use the debug rip command to enable tracing of RIP requests and responses.
Use the no form of this command to disable tracing of RIP requests and
responses.
Syntax
debug rip packet
no debug rip packet
Default Configuration
Display of RIP traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug rip packet
debug sflow
Use the debug sflow command to enable sFlow debug packet trace. Use the
no form of this command to disable sFlow packet tracing.
Syntax
debug sflow packet
no debug sflow packet