Dell N1100-ON, Reference Manual

Page: 2038 / 2332

Switch Management Commands
2038
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug dot1ag all
Dot1ag CCM, LBM, LBR, LTM, LTR tracing enabled.
console#
console#debug dot1ag events
Dot1ag events tracing enabled.
console#
console#debug dot1ag ccm
Dot1ag CCM tracing enabled.
console#
console#no debug dot1ag ccm
Dot1ag CCM tracing disabled.
debug dot1x
Use the debug dot1x command to enable dot1x packet tracing. Use the “no”
form of this command to disable dot1x packet tracing.
Syntax
debug dot1x packet [r eceive | transmit ]
no debug dot1x packet [r eceive | transmit ]
Default Configuration
Display of dot1x traces is disabled by default.
Command Mode
Privileged Exec mode.